Views

The Korg Creator™ Korg Document has several views so you can work effeciently. Sometimes it is important to get a birds eye look at your Korg file, and sometimes you need to only look at a portion of the file.

Views can be acccess either by the Views top-level menu, or the Master Gear Menu oon the upper right of the document.

Korg files (or we call them Banks) have 6 components to them:

Generally the Program is the Queen of the Bank, so much centers on the Program. Because of this, most Views have at least something to do with the Programs.

There are 5 Views, separated into 3 Categories: General, Detailed, and Special.

There are two General Views:

Full View
This includes from right to left: Program-Oscillator/Zones, Multisample-Samples.

This is a good general view of the Bank. You can select Programs and see the Oscillator/Zones that work within them. You can view the Multisamples, and view the Samples referenced by them. And you can assign Multisamples to Oscillator/Zones very easily, since the lists are fight next to each other.

Four Corners
This includes from right to left: Program-Oscillator/Zones, the below that left to right Multisample-Samples.

This performs the same purposes of Full View, except that it values the details of each view (you can see more of the columns) because of 2x2 alignment. Full view is more valuable when you want to see more entries of one list.

There are 2 Detailed Views:

Program-Oscillator/Zone-Multisample View
This includes from right to left: Program, Oscillator/Zones, Multisamples.

This is when you are most concerned with assign already-designed Multisamples to Oscillator/Zones. The Samples list is omitted since you are already comfortable with the contents of the Multisamples.

You have more horizontal information since there are only 3 lists.

Multisample-Sample View
This includes from right to left: Multisamples and Samples

This is for hardcore Multisample designing, you can see the minutae of the Multisamples and of the Samples. You are not concerned with Programs or anything other then the Multisamples and Samples.

You have much more horizontal information since there are only 2 lists.

Finally, there is one Special View:

Combi View
This includes from right to left: Combis, Parts, and Programs.

This is the Combi Editor, where you can assign Programs to Parts, and thus develop your own Combis easily. Combis do not exist on any other list, since Programs are more commonly used and Combis are "far away" from Multisamples and their dealings.