Ensoniq Disk Tools User's Page

NOTE: All versions before Version 2.2 Build 33 have expired as of January 2006. Please download the latest update using the instructions below.

Patch Updates
Starting with updates after Version 2.2, Revision/Build 22, Ensoniq Disk Tools updates are available again on our Web Site. They are in the form of "Patches", files you download to update your currently installed program. Some comments:

• You will need at least Version 2.2, Revision/Build 22 to use this system. You will simply click the Update Button on the main screen in the program - that will bring up your browswer, dial the Internet, and take you to a Web page that will inform you on the availability of an update. If there is one, it will display a link for you to download it.
• You will not need to incrementally update. Your only concern is to update your version to the current one displayed.
• These "Patches" ARE NOT COMPLETE PROGRAMS. They only update your current installation. If you need another complete version, it can be snail-mailed to you at a nominal charge; see below.

To get the update, please following these instructions:

• IF YOU CAN CONNECT TO THE INTERNET FROM THIS COMPUTER:
  Start the Disk Tools program file, named dt32.exe (it must be version 2.2 revision/build 22 or later) from within the directory you specified when installing Ensoniq Disk Tools.
Click the Tools on the Web/Update menu option, and follow the prompts from the web page that it dials.


• IF YOU CANNOT CONNECT TO THE INTERNET FROM THIS COMPUTER:
  Start Disk Tools, click Help, and go to the About box. Note the Version number and the Revision number (such as 2.2.22). Shut down Disk Tools.
  When you can connect to the Internet on another computer, use this syntax to get to the correct web page:
  www.chickensys.com/cgibin/update.cgi?type=Disk%20Tools&maj=[major ver]&min=[minor ver]&rev=[build number]
  Major Version Number, Minor Version Number, and Build number MUST BE two digits!
  For example, if you have Version 2.2, Revision/Build 22, you would type:
  www.chickensys.com/cgibin/update.cgi?type=Disk%20Tools&maj=02&min=02&rev=22
  Save your update file to floppy disk or other medium, and take it to your Disk Tools computer.
  
• Put the update file in your Disk Tools folder. Run it, and follow the instructions. IMPORTANT: Make sure Disk Tools is not running when you apply the update.
• Start Disk Tools; it should reflect the latest update.

Updates, full versions, and/or printed manual sent through snail-mail or e-mail carry a charge of $7.00 ($12.00 international) for each item. You can order these at the Rubber Chicken Software Order Page. No programs will be transmitted via e-mail - they must be sent snail-mail.